Skip to content
New Spring Products are being added now!!!
New Spring Products are being added now!!!
diy deco mesh wreath with have a hoppy easter snow globe sign

DIY Deco Mesh Wreath with Snow Globe Easter Sign

pastel deco mesh wreath with hoppy easter metal sign
Super easy tutorial for a deco mesh wreath using the ruffle technique, ribbon strips and a Have a Hoppy Easter metal snow globe style sign. All the supplies are in stock right now, so don't hesitate!

Watch the Replay

We made this wreath a few days ago as a Facebook and TikTok live. You can watch the replay right here. And if you haven't followed us on TikTok....just click the link!

Supplies

XX748827 24" White Work Wreath

XB240710-01 10" Solid White Breeze Mesh

RY8339AT 10.25" Faux Jute Check

MD0859 12.25" Embossed Easter Snow Globe Sign

RGA8592M6 2.5" Mini Rose Lace Edge Ribbon

31402-09-02 1.5" Pink Lavender Yellow Blue Wide Stripes

31405-40-30 2.5" Pastel Kennedy Woven Plaid

RM997513  1.5" Lavender Tinsel

Handy Tools

Cutting Mat

Rotary Cutter

Scissors

Bow Makers

Zip Ties

Highlights

20" Ruffles - takes both rolls of mesh. If last ruffles falls a little short, it won't show.

Place two ruffles in each twist. We placed the solid white on the bottom and checked on top.

13" Ribbon Strips - we cut 18 of each style of ribbon to make a cluster of four ribbon strips. You can use less if you like, or even cut the strips longer. So many ways of adding, or even leaving ribbon off.

Bow - we made about 14" bow using the EZ bow maker. You can make a bow any way you like, you don't have to use a bow maker. We made one big bow, but if you prefer you can make a bit smaller bows and add 2-3 instead of just one. If you wish to have more bow, you might cut back on the ribbon strips. Another option is to make your bows first and place them. Any ribbon you have left over could be used for ribbon strips. You don't have to put the exact same combination in each twist. Mix it up!

Sign - add chenille stems to the back of the sign and secure to the wreath form being careful not to squish down your mesh too much. There is a sawtooth hanger at the top of the sign, but you'll need to add your chenille stem to the bottom of the sign. You can use a cable mount (add extra glue) and thread the chenille stem through that. If you have trouble getting your sign secure or squishing down the mesh too much, use those longer chenille stems, or put two together. It helps to hang your wreath to get your placement. This goes for placing your bow too. After this video was finished and I hung the wreath on my door, I had to raise the bow up some and move it more toward the front. 

Hanger - make a hanger for the back of the wreath chenille stems, zip ties, or floral wire. Be sure to check the back and make sure you don't have anything sharp that would scratch your door.

Follow for More!

Be Mine Tweet Heart Valentine Wreath Tutorial

be mine tweet heart valentine wreath tutorial

Deco Mesh Mixed Sunflower Wreath Tutorial

 

 

Previous article Big Carrot Wreath Tutorial
Next article Valentine Lantern Bow: Quick & Easy