Ready to do a little Halloween wreathing? Now's a great time since we have a sale going on))) Here's a wreath supply kit that we did today.
We did a ruffle technique using 10" wide foil mesh, ribbon strips and big bow off the bottom right. Some cool mummy hands look like they are holding the spooky sign.
You can purchase the supply kit here:
Spooky Wreath Supply KitSupplies:XX751126 - 24" Silver Metallic Pencil Wreath
RY850099 - Grey Silver 10" Matte Wide Foil Deco Mesh - 2 Rolls
AP8242 - Spooky Sign
HH7272 - Mummy Hand - 2
RG0168102 - 2.5" Skull Ribbon
Q916809-16 - 1.5" Grey Linen White Black Polka Dot Ribbon
RG0184524 - 1.5" Red Black Horizontal Stripe
RG01465WJ - 2.5" Red Black Harlequin
Cutting Tools (Amazon):Fiskars 60mm Rotary Stick CutterFiskars 24" x 36" Cutting MatRibbon Template (Etsy)
Deco mesh was cut into 30" strips and a ruffle made by scrunching up through the middle of the mesh. Apply one ruffle to each twist on the wreath.
Ribbon strips were cut 13" in length. A cluster of the four ribbons was placed in each twist.
Sign was attached by stapling full length chenille stems to the back of the sign and secured to the wreath frame. If you need additional length on the stems, just add an extra chenille stem.
Mummy hands were positioned and attached with floral wire to the wreath frame.
Bow was made with Bowdabra.
Make a hanger for the back of the wreath using a chenille stem, floral wire or zip ties.
Finished width was 25-26"