deco mesh ruffle wreath with hello sunshine sign

April 9, 2024 Jeannie Pence

Hello Sunshine Deco Mesh Ruffle Wreath Tutorial

Hello Sunshine!

Here's bright and cheerful wreath that you can make for your front door! It is easy to make and we have all the supplies in a kit for you))

We made this deco mesh ruffle wreath a few days ago as a Facebook live and if you missed it, you can watch the replay below.

Supplies

Kit

Hello Sunshine Wreath Kit

And if the kit is sold out, or you would like to change something here or there, here are links to the individual products.

Individual Products

TT-084 10" Hello Sunshine Sign (metal)

XX748811 24" Hot Pink Work Wreath

RX9149TN 2.5" Fuchsia/White Stripe Ribbon

46412-40-22 2.5" Yellow/Pink Flowers Ribbon

RX9145A2 1.5" Turquoise/White Striped Ribbon

RGE720227 7/8" White Ribbon

10" Fabric Plaid Mesh - 2 rolls

Highlights

Mesh - Cut pieces in 20" lengths. It takes 36 total (two rolls of mesh). If your mesh comes up a bit short, don't worry, it will never show.

Ruffles - Curl under the cut edges of mesh, scrunch up through the middle and make a ruffle. Place two ruffles in each twist.

Ribbon Strips - Cut 13" in length. Finish off ends with a chevron cut or angled cut. We put a cluster of four styles of ribbon in each twist. But you don't have to! This deco mesh wreath would be just a pretty without ribbon strips. Be sure to spread the ribbons out so they all show up. Run your fingers under the ribbons to give them a little curl.

Sign - Punch holes in the metal sign and attach chenille stems. Or you can use cable mounts and secure chenille stems with them. Secure the sign to the wreath form. Position it in the middle or side, whichever you prefer. Take care not to squash down the mesh or ribbons with the sign, but do attach it to the metal wreath from. Reach in from the back side of the wreath to attach the sign.

Bow - Make a 14" wreath bow in any manner you like. Carrie used the EZ Bowmaker. It's one of our go-to tools.

Finishing Touches - Clip any stray threads and make a hanger with a chenille stem or floral wire. Re-fluff ribbons as necessary. Stand back and take a look. Sometimes you don't see gaps or wayward ribbons until you see it on the door. Or in the photos later!